Filter
Top Products
Getting to Know Your GTO
10
Audio System
Setting the Time: With the radio on,
press the TIME button for more than two
seconds. When TIME ADJ or SET TIME
is displayed, press the SEEK/TRACK
arrows to adjust the hours. Press the
TUNE arrows to adjust the minutes, and
then press the TIME button again to
save the setting.
CONTROLS
ON OFF: Press this button to turn the
system on and off.
AUDIO: Turn the knob to increase or
decrease the volume. Pushing the knob
will access the following settings:
• BASS/TREBLE SETTINGS: Push
the AUDIO knob until BASS or
TREBLE appears on the display. Turn
the knob to increase/decrease. To
adjust a setting to the middle setting,
push and hold the AUDIO knob until
CENTERED appears on the display.
• BALANCE/FADE SETTINGS: Push
the AUDIO knob until BALANCE
appears on the display. Turn the knob
to adjust balance toward the left or
right speakers. Push the AUDIO knob
again until FADER appears on the
display, and turn the knob to move
the sound to the front or rear
speakers.
• BOOST: Press the AUDIO knob while
in any equalization setting, until
BOOST appears on the display. Turn
the knob to adjust the level of effect
of the equalization.
FM AM: Press this button to switch to
AM, FM1 and FM2.
TUNE DISC: Press the right or left
arrow to change radio frequencies or to
advance to the next CD.
SEEK TRACK: Press the right or left
arrow to go to the next or previous
station and stay there. For CDs, press
the left arrow once to return to the start
of the current track and the right arrow
to advance to the next track.
EQ: Press this button to choose
between bass and treble equalization
settings designed for different music
types or talk radio. To turn it off, press
the button until EQ OFF appears on the
display. To give the equalization setting
a boost, push the AUDIO knob once
while in any EQ setting and BOOST will
appear on the display. Turn the AUDIO
knob to select a boost level.
LOC (Local): Press this button to switch
the radio to local mode. Local will
appear on the display, and only stations
with strong signals and clear reception
will be found when using SEEK.
FR FF (Fast Reverse/Fast Forward):
Press and hold these buttons to move
quickly through a track on a CD. You will
hear sound at a reduced volume and the
display will show elapsed time.
Setting Radio Station Presets: With
the radio on, select the desired band
by pressing FM AM. You can save six
stations on each of AM, FM1 and FM2
for a total of 18 presets.