Filter
Top Products
42
THE PERFECT FIT
Traction Products
Wear Strips
To avoid excessive tunnel or cooler damage, wear strips must be
installed whenever track studding is used. See your dealer for more
information.
Wear strips are designed for a specific stud length. See your dealer’s
studding chart for recommended traction accessories.
NOTICE: Never add shims to the wear strip. Track damage will result due to
lack of clearance between upper carrier wheels and track.
Components as viewed from the rear of the track:
1. Top of tunnel
2. Wear strip
3. Track
4. Wear strip mounting holes
NOTICE: Whenever wear strips are relocated, be sure there’s adequate stud
clearance to the heat exchangers. Lack of clearance may result in
damage to heat exchangers.
1
2
4
3