Filter
Top Products
40
THE PERFECT FIT
Traction Products
Another way to tailor your machine is to install traction products. See
your dealer about installing studs and/or carbides. Many tracks with
deep lug designs cannot be studded, but your dealer will be able to offer
advice and assistance.
NOTICE: Installing studs on models without wear strips will result in damage to
the cooler or tunnel. Always ensure that wear strips are installed
before installing studs. See your dealer for more details.
Tip: Before equipping your machine with traction products, be aware of the laws
in your area pertaining to the use of traction products.
Track studding will enhance braking control on hard-packed snow or
ice, but extreme caution is still required on such surfaces. Steering abil-
ity may be reduced on hard-packed snow or ice.
WARNING! Loss of control can result in serious personal injury or death.
Proper balance of traction products on the skis and track must be maintained to
obtain proper vehicle control on hard-packed snow or ice. See your dealer for
assistance.
NOTICE: Use of studs longer than the recommended length on machines
equipped with coolers will result in damage to the cooler or tunnel.
Always use the recommended length studs.