Filter
Top Products
52
CONTROLS AND FEATURES
Controls
Automatic Transmission Gear Selector
The transmission gear selector is located
on0 the right side of the vehicle directly
above and forward of the engine and has
five positions: high, low, neutral; reverse,
and park.
To shift into “High” or “Park”, you
must first depress the foot brake to
activate the High/Park lock out
mechanism.
When shifting out of “High” or “Park”, it is
not necessary to depress the brake.
NOTE: To extend belt life, use low
forward gear in heavy pulling situations
and in situations where you are operating
below 7 miles per hour for extended
periods of time.
Always place the transmission in park with the parking brake locked
whenever the vehicle is left unattended.
GENERAL RANGE OPERATION GUIDELINES:
Low Range Heavy pulling, basic operational
speeds less than 7 MPH, riding
through rough terrain (swamps, moun-
tains, etc.), low ground speeds.
High Range High ground speeds, speeds above 7
MPH.
H
N
R
P
L
To change gears, stop the vehicle and with the engine idling,
move the lever to the desired gear. Depress the foot brake if
shifting into high or park. Shifting gears with the engine speed
above idle or while the vehicle is moving could cause transmission
damage.
CAUTION