Filter
Top Products
88
MAINTENANCE
Gearcases
Transfer Case
Always check and change the fluid at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 77. Refer to the Gearcase
Specifications Chart on page 94 for recommended lubricants, capacities
and torque specifications.
Fluid Check
The fill plug and level check plug are located on the left side of the
transfer case. The fluid level is sufficient when fluid flows out of the
check plug hole at step 4.
1. Position the vehicle on a level surface.
2. Remove the fill plug.
3. Remove the level check plug.
4. Add the recommended fluid to the fill plug hole until it begins to
flow out of the check plug hole.
5. Reinstall the level check plug. Torque to specification.
6. Reinstall the fill plug. Torque to specification.
Fill Plug
Level
Check
Plug
Drain Plug