Filter
Top Products
35
FEATURES AND CONTROLS
Brake Pedal
Depress the brake pedal to
slow or stop the vehicle.
Apply the brakes while
starting the engine.
Throttle Pedal
Push the pedal down to
increase engine speed. Spring
pressure returns the pedal to
the rest position when
released. Always check that
the throttle pedal returns
normally before starting the engine. Make sure there's adequate throttle
pedal freeplay. See page 106 for throttle pedal adjustment procedures.
This vehicle is equipped with a throttle release switch, which is
designed to reduce the risk of a frozen or stuck throttle. If the throttle
cable should stick in an open position when the operator releases the
throttle pedal, engine speed will be limited, and power to the rear wheels
will be reduced.
Rollover Protective Structure (ROPS)
The Rollover Protective
Structure (ROPS) on this
vehicle meets OSHA 1928.53
rollover performance
requirements. Always have your
authorized POLARIS dealer
thoroughly inspect the ROPS if
it ever becomes damaged in any
way.
No device can assure occupant
protection in the event of a
rollover. When used with seat
belts and cab nets, the ROPS
helps prevent occupants from being ejected from the vehicle. Always
follow all safe operating practices outlined in this manual to avoid
vehicle rollover.
WARNING! Vehicle rollover could cause severe injury or death. Always avoid
operating in a manner that could result in vehicle rollover.
Throttle
Pedal
Brake
Pedal
ROPS Label