Polaris RANGER CREW 800 Offroad Vehicle User Manual


 
5
INTRODUCTION
Vehicle Identification Numbers
Record your vehicle's identification numbers and key number in the spaces provided.
Remove the spare key and store it in a safe place. An ignition key can be duplicated only by
ordering a POLARIS key blank (using your key number) and mating it with one of your
existing keys. The ignition switch must be replaced if all keys are lost.
Vehicle Model Number: _______________________________________________________________________
Frame VIN: _________________________________________________________________________________
Engine Serial Number: ________________________________________________________________________
Key Number: _______________________________________________________________________________
European Vibration and Noise
The driver-perceived noise and hand/arm and whole body vibration levels of this machinery
is measured per prEN 15997.
The operating conditions of the machinery during testing:
The vehicles were in like-new condition. The environment was controlled as indicated by the
test procedure(s).
The uncertainty of vibration exposure measurement is dependent on many factors, including:
Instrument and calibration uncertainty
Variations in the machine such as wear of components
Variation of machine operators such as experience or physique
Ability of the worker to reproduce typical work during measurements
Environmental factors such as ambient noise or temperature
Engine Serial Number
Key
Number
VIN (4X4, 6X6)
####
VIN (CREW)