Polaris PMS 419 Offroad Vehicle User Manual


 
90
MAINTENANCE
Filter Systems
Fuel Tank Vent Filter
If the engine sputters, the
inline fuel tank vent filter
may be clogged. Do not
attempt to clean the filter.
Replace the filter with a new
filter.
1. Remove the driver’s seat.
Tip:Note the direction of the
arrow on the filter before
removing it.
2. Remove the filter and
install the new filter.
Make sure the direction
of the arrow is the same
as noted before filter removal.
3. Reinstall the seat.
Intake Pre-Filters
The engine intake pre-filter is
located on the left side of the
cargo box. The PVT intake
pre-filter is located on the
right side of the cargo box.
Inspect the pre-filters before
each use of the vehicle.
Remove the pre-filters and
use compressed air to clean
them frequently to ensure
adequate air flow.
Fuel Tank Vent Filter
PVT Intake Pre-Filter