Filter
Top Products
79
MAINTENANCE
Demand Drive Unit (Front Gearcase)
Fluid Change
The drain plug is located on the bot-
tom of the gearcase.
1. Remove the fill plug.
2. Place a drain pan under the drain
plug.
3. Remove the drain plug. Allow
the fluid to drain completely.
4. Clean the drain plug. If the o-
ring is damaged, install a new o-
ring.
5. Reinstall the drain plug. Torque
to specification.
6. Add the recommended fluid to
the bottom thread of the fill plug
hole.
7. Reinstall the fill plug. Torque to
specification.
8. Check for leaks. Discard used
fluid properly.
Drain Plug
(bottom view)