Polaris ATP 330 4x4 Offroad Vehicle User Manual


 
88
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Transmission Oil Check
The transmission lubricant level should be checked
every six months or 1000 miles (1600 km),
whichever comes first. Transmission oil should be
changed annually.
1. Position the ATV on a level surface,
remove the fill plug (1), and check the oil
level. NOTE: The transmission fill plug is
located on the right side of the machine,
behind the footwell.
2. Use the gearcase oil fill chart and the
following illustration to determine correct
fluid levels. NOTE: When adding oil, use
Polaris Premium Synthetic Gearcase
Lubricant. See page 121 for t he part numbers
of Polaris products.
Gearcase Oil Fill Chart
Model
Oil Level “A” Capacity
ATP 500 4x4 15/8 13.5 o z. (400 ml)
ATP 330 4x4 15/8 13.5 oz. (400 ml)
1. Remove the fill plug.
2. Remove the transmission drain plug (2)
located on the bottom left hand side and
drain the oil. Catch and discard used oil
properly.
3. Clean and reinstall the drain plug torque to
14 ft. lbs. (19 Nm).
4. Add the correct amount of Polaris
Premium Synthetic Gearcase Lubricant.
Refer the the gearcase oil fill chart for
proper oil levels.
5. Check for leaks.
1
A
2