Polaris ATP 330 4x4 Offroad Vehicle User Manual


 
45
FEATURES AND CONTROLS
Automatic Transmission Gear Selector
The transmission gear selector (1)
is located on the right side of the
vehicle.
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
To shift into HIGH or PARK, you
must first apply the auxiliary brake
to activate the high/park lock-out mechanism. When shifting out of
HIGH or PARK, it’s not necessary to apply the brake.
Whenever the ATV is left unattended, always place the transmission in
park and lock the parking brake.
Maintaining shift linkage adjustment is important to assure proper
transmission function. S ee your dealer if you experience any shifting
problems.
Belt Life
To extend belt lif e , use low forw ar d gear in heavy pulling situa tions and
when opera ting at le ss than s eve n miles p er hour for extended periods of
time.
If towing the vehicle is necessary, shift the transmission into neutral for
better mobility and to prevent damage to the belt.
1
H
N
P
L
R
Shifting gears with the engine speed above idle or while the
vehicle is moving could cause transmission damage. To change
gears, stop the vehicle, and with the engine idling, move the
lever to the desired gear . Apply the auxiliary brake before
attempting to shift into high gear or park.
CAUTION