Polaris 9922463 Offroad Vehicle User Manual


 
78
MAINTENANCE
Lights
Taillight/Brakelight Lamp Replacement
1. Remove the taillight lens
cover mounting screws.
Remove the lens cover
and gasket and set aside
for reassembly.
2. Remove the lamp.
3. Apply dielectric grease
to the socket and install
the new lamp.
4. Test the taillight/brake
light for proper opera-
tion.
5. Reinstall the gasket and
lens cover.
Indicator Lamp Replacement
1. Remove the instrument panel, if necessary, to access the back of the
indicator panel.
2. Using a small, straight-blade screwdriver, turn the base of the bulb
1/4 turn counterclockwise.
3. Using a needle-nose pliers or similar tool, pull the lamp out of the
indicator panel housing.
4. Insert the new bulb and seat it by turning it 1/4 turn clockwise.
5. Reinstall the instrument panel if removed.
Screw
Lamp
Cover