Polaris 9922463 Offroad Vehicle User Manual


 
52
MAINTENANCE
Engine Oil
Oil Recommendations
Always change the oil filter whenever changing oil.
Polaris recommends the use of Polaris PS-4 PLUS Performance Syn-
thetic 2W-50 4-cycle oil or a similar oil for this engine. Oil may need to
be changed more frequently if Polaris oil is not used. Always use 2W-50
oil. Follow the manufacturer's recommendations for ambient tempera-
ture operation. See page 99 for the part numbers of Polaris products.
Mixing brands or using a non-recommended oil may cause serious engine
damage. Always use the recommended oil. Never substitute or mix oil brands.
Oil Specifications
Oil Level
The oil dipstick is located on the left
side of the vehicle.
1. Position the vehicle on a level
surface. Place the transmission in
neutral. Lock the parking brake.
2. Start the engine. Allow it to idle
for 30 seconds. Stop the engine.
3. Remove the dipstick. Wipe it dry
with a clean cloth.
4. Reinstall the dipstick completely.
Make sure the cap is fully seated
to keep the angle and depth of the
stick consistent.
5. Remove the dipstick and check
the oil level. Add oil as needed.
Maintain the oil level in the safe
range. Do not overfill.
6. Reinstall the dipstick.
Lubricant Capacity Drain Plug Torque
PS-4 PLUS Performance
Synthetic 2W-50 4-Cycle Oil
2 qts. (1.9 l) 14-17 ft. lbs. (19-23 Nm)
Safe
Add Oil
{
Safe Range