Filter
Top Products
30
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Hand brake Ensure proper operation 24
Brake fluid Ensure proper level 59
Foot brake Ensure proper operation 24
Front suspension Inspect, lubricate if necessary 51
Rear suspension Inspect, lubricate if necessary 51
Steering/steering lock Unlock the steering; ensure free
operation
27
Tires Inspect condition and pressure 65
Wheels/fasteners Inspect, ensure fastener tightness 65
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 26
52
Coolant level Ensure proper level 74
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 23
64
Indicator lights/switches Ensure operation 20
Engine stop switch Ensure proper operation 20
Mirrors Adjust for best side/rear vision 22
Drive chain Check condition/slack, lubricate as
needed
71
Air filter, pre-filter Inspect, clean 68
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
21
77
Brake light/taillight Check operation, apply Polaris dielec-
tric grease when lamp is replaced
78
Riding gear Wear approved helmet, goggles, and
protective clothing
8