Polaris 9922249 Offroad Vehicle User Manual


 
79
MAINTENANCE
Cooling System
Radiator Coolant
To ensure that the coolant maintains its ability to protect the engine,
Polaris recommends that you drain the system completely every two
years and add a fresh mixture of antifreeze and water.
Replace the coolant any time the cooling system has been drained for
maintenance or repair. If the recovery bottle has run dry, check the level
in the radiator. Add coolant as needed.
CAUTION! Escaping steam can cause burns. Never remove the pressure cap
while the engine is warm or hot. Always allow the engine to cool before
removing the pressure cap.
1. Open the front box cover and
pull open the access door.
2. Remove the pressure cap.
3. Using a funnel, slowly add
coolant through the radiator
filler neck.
4. Reinstall the pressure cap. Use
of a non-standard pressure cap
will not allow the recovery
system to function properly.
Contact your dealer for the
correct replacement part.
5. Secure the access door.
6. Secure the box cover.
Radiator Cap