Filter
Top Products
46
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 29
80
Brake fluid Ensure proper level 30
Auxiliary brake Ensure proper operation 32
Front suspension Inspect, lubricate if necessary 69
Rear suspension Inspect, lubricate if necessary 69
Steering Ensure free operation -
Tires Inspect condition and pressure 85
Wheels/fasteners Inspect, ensure fastener tightness 85
86
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 33
70
Coolant level (if applicable) Ensure proper level 78
79
Coolant hoses (if applicable) Inspect for leaks -
Throttle Ensure proper operation 28
83
Indicator lights/switches Ensure operation 26
Engine stop switch Ensure proper operation 27
Air filter, pre-filter Inspect, clean 87
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
27
89
Brake light/tail lamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
93
Riding gear Wear approved helmet, goggles, and
protective clothing
8