Polaris 9920770 Offroad Vehicle User Manual


 
83
MAINTENANCE AND LUBRICATION
Lights
Taillight/Brakelight Lamp Replacement
If the taillight/brakelight does not work the lamp may need to be
replaced.
1. Remove the taillight lens cover
mounting screws. Remove the
lens cover and gasket and set
aside for reassembly.
2. Remove the lamp (1).
3. Apply dielectric grease t o the
socket and install the new
lamp.
4. Test the taillight/brakelight to
see t hat it’s working.
5. Reinstall the gasket and lens cover .
Indicator Lamp Replacement
1. Remove the instrument panel or front cover, if necessary, to access
the back of the indicator panel.
2. Using a small, straight-blade screwdriver, turn the base of the bulb
1/4 turn counterclockwise.
3. Using a needle-nose plier or similar tool, pull the lamp out of the
indicator panel housing.
4. Insert the new bulb and seat it by turning it 1/4 turn clockwise.
5. Reinstall the instrument panel or front cover.
1