Polaris 9919412 Offroad Vehicle User Manual


 
34
CONTROLS
WARNING
Operating an ATV with sticking or improperly operating throttle
controls could cause an accident and lead to severe injury or
death.
Never start or operate an ATV with a sticking or improperly
operating throttle. Always contact your dealer for service if throttle
problems arise.
Failure to check or maintain proper operation of the throttle
system can result in an accident if the throttle lever sticks during
operation. Always check the lever for free movement and return
before starting the engine. Also check occasionally during
operation.
Throttle Lever
Engine speed and vehicle
movement are controlled by
pressing the throttle lever (1).
The t hrottle lever is spring
loaded. Engine speed returns
to idle when the lever is
released.
This ATV is equipped with Polaris Electronic Throttle Control (ETC),
which is designed to reduce t he risk of a frozen or stuck throttle. If the
throttle cable should stick in an open position when the operator
releases the throttle lever, the engine will stop, and power to the rear
wheels will cease.
WARNING
The Electronic Throttle Control (ETC) stops the engine in the
event of a throttle system malfunction and is provided for your
safety. Do not attempt to modify the ETC system or replace it
with any after market throttle mechanisms.
1