Filter
Top Products
112
MAINTENANCE
General Maintenance
Drive Belt Installation
1. Drop the drive belt over the
drive clutch and pull back the
slack (A).
NOTE: To ensure satisfactory belt
life, install belts so they
operate in the same
direction of rotation by
positioning the
identification numbers so
that you can read them. If
required, separate the
sheaves as outlined in the
belt removal procedures.
2. Turn the driven clutch moveable
sheave clockwise while pushing
inward and f orcing the belt
down between the sheaves.
3. Hold the belt down between the
sheaves and roll the bottom portion over the outer clutch sheave
(B). Work the belt to t he outer edge of the sheave.
4. Standard Clutch: Skip to step 5.
TEAM Clutch: Rotate the L-wrench to tighten the sheaves.
Remove the wrench and store i n the tool kit.
5. Close the clutch guard and reinstall the retaining pin.
6. Close and secure the hood and release the parking brake.
A
B