Polaris 800 Dragon IQ Offroad Vehicle User Manual


 
123
TROUBLESHOOTING
Drive Belt Troubleshooting
Belt Wear/Burn Diagnosis
Causes Solutions
Driving at low RPM Drive at higher RPMs. Gear the machine down. Check
belt deflection.
Insufficient warm-up Warm the engine at least five minutes. Take the drive
belt off the machine in extremely cold weather and
warm it up. Break machine loose from the snow.
Towing at low RPM Do not tow in deep snow. Use fast, aggressive throttle
to engage clutch.
Riding with high RPM
and slow speed (8000
RPM/10 MPH)
Lower the gear ratio. Reduce RPM. Avoid riding in
high ambient temperatures. Check for snow ingestion.
Ice and snow build-up
between track and tunnel
Warm the engine at least five minutes. Take the drive
belt off the machine in extremely cold weather and
warm it up. Break machine loose from the snow.
Poor engine performance Check for carburetor and choke synchronization, fouled
plugs, debris in the carburetor(s) and water, ice or dirt
in the fuel tank or fuel line.
Loading machines onto
trailers
Skis may gouge into trailers and prevent the drivetrain
from spinning properly. Use enough speed to drive the
machine completely onto the trailer. Push and pull it to
finish loading if necessary.
Clutch malfunction Inspect clutch components. See your dealer.
Slow, easy clutch engage-
ment
Use fast, aggressive throttle to engage clutch.