Filter
Top Products
90
MAINTENANCE
Exhaust System
Check the exhaust system for wear or damage at approximately 2000
miles (3200 km). To inspect, allow the engine and exhaust system t o
cool completely. Open the hood and inspect the muffler and pipes for
cracks or damage. Check for weak or missing retaining springs or
damper/support grommets.
WARNING
Hot exhaust system parts can cause serious burns. Allow
adequate time for the exhaust system to cool. Never perform this
procedure with the engine running.
Cooling System
Coolant
The coolant supplied in the system is a 60/40 mixture of
ethylene-glycol and distilled water. This mixture provides protection
against freezing. Contact your dealer if greater protection is required.
Use Premium 60/40 anti-freeze coolant, which is a lready premixed and
ready to use. Do not dilute with water. Never exceed a 60%
antifreeze/40% water mixture. See page 117 for the part numbers of
Polaris products.
NOTE: Never add tap water to the cooling system. Minerals cause
deposits and may react adversely with the metals in the
engine and cooling system.