Polaris 600 Widetrak IQ Offroad Vehicle User Manual


 
59
PRE-RIDE INSPECTIONS
Before Starting the Engine
n Brakes
Always check the following items for proper operation before starting
the engine.
Brake Lever Travel
Squeeze the brake lever. It
should move no closer to the
handgrip than 1/2" (1.3 cm).
A smaller distance indicates
low brake fluid level or air in
the hydraulic system. See
pages 91-93 or see your
dealer for service.
Brake Lever Feel
If the brake lever feels “spongy” when squeezed, check the brake fluid
level and condition. Check for the presence of air in the fluid system.
See pages 91-93 or see your dealer for service.
WARNING! Continued use of “spongy” brakes may cause a complete loss of
brakes, which could result in serious injury or death. Always have the brakes
serviced at the first sign of sponginess.
n Brake Fluid
Check the brake fluid in the mas-
ter cylinder before each ride.
View the brake fluid level through
the sight glass on the top of the
master cylinder. The eye will
appear dark when the fluid level is
full. If the sight glass is any color
other than black, add brake fluid.
See page 92.
1/2" (1.3 cm)
Sight
Glass
Master
Cylinder