Polaris 600 RMK 144/155 Offroad Vehicle User Manual


 
33
FEATURES
Instrumentation
MFD Digital Display Programs
Press and release the MODE button to cycle through the three MFD pro-
grams: Performance, Engine and History. Each program remains active
until you cycle to the next program. While any program is active, press
and release the SET button to cycle through the program’s screens.
Performance Program
Press and release the MODE button until the performance program
screen is active. The default display for this screen includes electrical
system voltage, fuel level (if equipped) and either speed or tachometer,
whichever is selected (see page 32).
Press and release the SET button to cycle through the following screens:
odometer, trip 1 odometer, trip 2 odometer, fuel trip odometer (if fuel is
low) and clock (if equipped). Use the following procedures to make
changes to these screens.
Odometer Setting
The odometer records the vehicle's total
distance traveled since manufacture. The
odometer cannot be reset.
Trip Settings
Trip 1 and Trip 2 are odometers used to
check fuel mileage or to keep track of
distance traveled. Both odometers can be
reset to zero.
1. Enter the Performance Program.
2. Press and release the SET button
until the desired trip screen is active.
3. Press and hold the SET button for two seconds to reset the trip
odometer to zero.
4. Press and release the SET button to view another trip screen if
desired.