Polaris 600 HO IQ LX CFI Offroad Vehicle User Manual


 
49
THE PERFECT FIT
Rear Suspension Adjustments
Initial Spring Preload Setting (Sag Method)
To determine sag, commonly referred to as ride-in, subtract measure-
ment Y from X (sag=X-Y). If the measured sag is incorrect, adjust the
FRA position and/or rear torsion spring preload.
NOTE: This is only an initial setup, and final spring preload may vary
based on rider preference and riding conditions.
Suspension Recommended Sag Adjustment
See
Page
IQ (121) 4-5 inches (10-13 cm) Torsion Spring
Preload
50
M-10 128
(LX)
3-4 inches (8-10 cm) FRA Position &
Rear Track Shock
Spring Preload
58
59
M-10 136
(Touring)
3-4 inches (8-10 cm) FRA Position &
Rear Track Shock
Spring Preload
58
59
SwitchBack
(144)
5 inches (13 cm)
(see note below)
Torsion Spring
Preload
55