Filter
Top Products
117
MAINTENANCE
Clutch System
To r q u e S t o p
Periodically check torque stop clearance. With clutches in proper align-
ment, measure rear torque stop clearance from the engine case. Measure
front torque stop clearance from the bracket when the isolator is bot-
tomed out on the bracket.
The clearance for both torque stops should be .010I-.030I (.25-.75mm).
Adjust if necessary. Lock the jam nut.
Front Torque Stop
.010
I-.030I (.25-.75 mm)
Bracket
Isolator
.010I-.030I
(.25-.75 mm)
Rear Torque Stop