Filter
Top Products
75
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 71. Items not listed in
the chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item Lube Capacity at
Fluid Change
Inspection Procedure
Engine Oil PS-4 5W-50
4-Cycle Oil
2 qt. (1.9 l) Maintain level in safe range
on dipstick. See page 77.
Brake Fluid DOT 4 Brake Fluid --- Maintain level between fill
lines. See page 85.
Transmission Oil AGL Gearcase
Lubricant &
Transmission Fluid
32 oz. (948 ml) Maintain level at bottom of fill
hole threads. See page 80.
Demand Drive
Fluid
(Front Gearcase)
Demand Drive
Fluid
9 oz. (265 ml) Maintain level at bottom of fill
hole threads. See page 82.
Front Prop Shaft
Yoke
U-Joint Grease --- Grease fittings (3 pumps
maximum) every 500 miles,
before long periods of
storage, or after pressure
washing or submerging.
Front Prop Shaft Yoke