Filter
Top Products
40
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Foot brake Ensure proper operation 24
Hand brake/lever travel Ensure proper operation 87
Brake fluid Ensure proper level 85
Front suspension Inspect, lubricate if necessary 75
Rear suspension Inspect, lubricate if necessary 75
Steering/steering lock Unlock the steering; ensure free oper-
ation
25
Tires Inspect condition and pressure 92
Wheels/fasteners Inspect, ensure fastener tightness 92
93
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 26
77
Coolant level (if applicable) Ensure proper level 83
84
Coolant hoses (if applicable) Inspect for leaks -
Throttle Ensure proper operation 23
114
Indicator lights/switches Ensure operation 20
Engine stop switch Ensure proper operation 20
Mirrors Adjust for best side/rear vision 22
Air filter, pre-filter Inspect, clean 94
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
21
97
Brake light/taillight Check operation, apply POLARIS
dielectric grease when lamp is
replaced
99
Riding gear Wear approved helmet, goggles, and
protective clothing
8
Winch (if equipped) Inspect cable and switch 58-69