Filter
Top Products
68
MAINTENANCE
Air Filter
1. Remove the seat.
2. Release the air box cover
clips, and remove the air
box cover.
3. Loosen the clamp and
remove the filter.
4. Remove the fabric type pre-
filter from the main filter.
Wash the pre-filter in soapy
water, then rinse and let dry.
5. Reinstall the pre-filter over
the main filter. Install a new
main filter if needed.
6. Reinstall the filter into the
air box and tighten the
clamp. Do not over-tighten
the clamp, as filter damage
could occur.
7. Reinstall the air box cover and the seat.
Breather Filter
The breather filter is on the hose that runs between the engine and air
box.
1. Remove the clamps and pull the breather filter out of the hoses. It's
not necessary to remove the lower hose from the engine.
2. Inspect the filter for debris. Blow gently through the filter in the
direction of the arrow to check for clogging. Replace if needed.
3. Check the hoses for cracks, deterioration, abrasion, or leaks.
Replace as needed.
4. Reinstall the filter and secure the clamps. The filter is effective with
the arrow pointing in either direction.
Operation of your vehicle without a breather filter can cause engine damage.
Always reinstall the breather filter after removing it for service.
Main Filter
Pre-Filter
Breather
Filter