Filter
Top Products
51
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 47. Items not listed in the
chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item Lube Method
Engine Oil PS-4 PLUS Performance
Synthetic 2W-50
See page 52.
Brake Fluid DOT 4 Only See page 59.
Drive Chain(s) O-ring chain lube or SAE
80/90
Lubricate.
Transmission Oil AGL Synthetic Gearcase
Lube
See page 56.
Demand Drive Fluid
(Front Gearcase)
Demand Drive LT
Premium Fluid
See page 58.
Front Prop Shaft
Yoke
Premium U-Joint Lube Grease fittings (3 pumps maximum)
every 500 miles (800 km), before long
periods of storage, or after pressure
washing or submerging.
Front Prop Shaft Yoke