Filter
Top Products
39
THE PERFECT FIT
EDGE Rear Suspension Adjustments
Weight Transfer During Acceleration
The preferred method for controlling
weight transfer during acceleration is
by adjusting the rear rear scissor stop
(RRSS). The factory setting is the best
for most trail riding conditions.
To decrease weight transfer under
acceleration (for improved cornering),
rotate the RRSS to a higher position
with the scissor stop tool located in
your tool kit.
To increase weight transfer or ski lift
during acceleration, move the RRSS
to the rearward hole on high position.
The RRSS may also be rotated to a
lower position for even more weight
transfer if desired.
Stock Position - This setting is most
desirable for trail riding. The scissor
stop is oriented with the mark posi-
tioned downward.
Medium or High Position (standard
hole location) - This setting will
decrease weight transfer. The mark is
positioned toward the torque arm.
Rearward Upper Position (optional
hole location) - This setting will
increase weight transfer.
NOTE: Your dealer can help you with
initial setup and additional
setup instructions to help you
achieve your optimum ride.
Medium/High
Stock
Rearward Upper
Position Mark
To rq ue Ar m
Scissor
Stop Tool