Polaris 340 Edge Offroad Vehicle User Manual


 
30
THE PERFECT FIT
Front Suspension Adjustments
Shock Damping (Indy Select Shock)
Adjustments to the compression stiff-
ness of Indy Select shocks can be
made by turning the adjustment screw
located near the base of the shock (+).
This adjustment is the easiest to per-
form and it should be considered first.
The factory setting for this shock is the
softest position, with the adjusting
screw all the way out (counterclock-
wise). If bottoming occurs, the Indy
Select feature should be used to
achieve the desired ride.
NOTE: An excessive adjustment can result in damage to the shock.
When adjusting these shocks, we recommend that you turn the
screw only 1/4 turn at a time, then test ride.
Turn the screw clockwise to increase compression and stiffen the ride.
Turn the screw counterclockwise to decrease compression and soften
the ride.
Always adjust both shocks equally.
Front Springs
For models without externally adjustable or revalvable shocks, the front
springs can be changed if spring preload alone isn't sufficient and fur-
ther adjustment is desired to control suspension stiffness. See your
Polaris dealer for more information.
+