Filter
Top Products
83
MAINTENANCE
Lights
Taillight/Brakelight Lamp Replacement
If the taillight/brakelight does not work the lamp may need to be
replaced.
1. Remove the t aillight lens cover
mounting screws. Remove the
lens cover and gasket and set
aside for reassembly.
2. Remove the lamp (1).
3. Apply dielectric grease t o the
socket and install the new
lamp.
4. Test the taillight/brakelight for
proper operation.
5. Reinstall the gasket and lens cover .
Indicator Lamp Replacement
1. Remove the instrument panel, if necessary, to access the back of
the indicator panel.
2. Using a small, straight-blade screwdriver, turn the base of the bulb
1/4 turn counterclockwise.
3. Using a needle-nose plier or similar tool, pull the lamp out of the
indicator panel housing.
4. Insert the new bulb and seat it by turning it 1/4 turn clockwise.
5. Reinstall the instrument panel if removed.
1