Polar V650 GPS Receiver User Manual


 
46
SYNCING
To sync data with the Flow web service you need FlowSync software. Go to flow.polar.com/V650, and down-
load and install the software before trying to sync.
1. Plug the micro USB connector into the USB port and the other end of the cable into your PC.
2. Make sure FlowSync software is running.
3. The FlowSync window opens on your computer, and the syncing starts.
4. Completed is displayed when you are done.
Every time you plug in your V650 to your computer, the Polar FlowSync software will transfer your data to the
Polar Flow web service and sync any settings you may have changed. If the syncing does not automatically
start, start FlowSync from the desktop icon (Windows) or from the applications folder (Mac OS X). Every time
a firmware update is available, FlowSync will notify you, and request you to install it.
If you change settings in the Flow web service while your V650 is plugged into your computer, press the syn-
chronize on FlowSync to transfer to the settings to your V650.
For support and more information about using FlowSync software, go to www.-
polar.com/en/support/FlowSync.