19
Installation
Installing the display unit and Hide-away unit
Installation notes
• Do not install the display unit or Hide-away unit in places where it may become subject
to high temperatures or humidity, such as:
* Places close to a heater, vent or air conditioner.
* Places exposed to direct sunlight, such as on top of the dashboard or the rear shelf.
* Places that may be splashed by rain, for example close to the door.
• Install this product in an area strong enough to bear its weight. Choose positions where
the display unit or Hide-away unit can be firmly installed, and install it securely.
If the display unit or Hide-away unit are not securely installed, the current location of
the vehicle cannot be displayed correctly.
• Do not install the Hide-away unit on the board covering the spare tire or other places
which are subject to vibration.
• When the Hide-away unit is installed under a front seat, ensure that it does not obstruct
the sliding action of the seat.
• When installing the Hide-away unit, choose a position that ensures there will be no con-
tact with luggage. The impact of a heavy weight or sudden shock on the Hide-away unit
will adversely affect the accurate display of the current location of the vehicle.
• Avoid installing the Hide-away unit in places where it will interfere with loading and
unloading of the spare tire, jack, tools, etc.
• Check that a disc can be ejected with the display unit installed.
• Install the Hide-away unit horizontally on a surface within +30 degrees to –30 degrees
tolerance (within five degrees to the left or right of your vehicle’s direction of travel).
Mis-installing the unit with the surface tilted more than these tolerances would increase
the potential for errors in the location display, and might otherwise cause reduced dis-
play performance.
• If installation angle exceeds 30º from horizontal, the display unit might not give its opti-
mum performance.
30°
30°
30°
5°
ENG/MASTER 96
<CRD4069A/U> 20
CRD4069-A_U_inst_001_031_US 10/25/05 10:58 Page 20