Filter
Top Products
7
8
9
7. Cut a small slit in the
rubber door insulation,
level with the rubber boot,
between the door and door
frame.
8. Guide the Signal
®
mirror
wire harness into the
preexisting slit (under the
rubber door insulation)
above the mirror mount.
9. Pass the wire harness
down through the rubber
door insulation and out of
the hole created in step 7.
Wire Routing Continued
1997-2001 Honda CRV
2002-2003 Honda CRV
This section intentionally
left blank.
- 5 -