Filter
Top Products
42
Troubleshooting and tips
If a fault occurs in your Pharos Traveler GPS 535, try to eliminate it with the measures described in
this chapter. If you fail to correct the problem, proceed as follows:
► Make a note of the steps and the circumstances that led to the fault. Also make a note of any
error messages displayed.
► Switch the Pharos Traveler GPS 535 off.
► Contact your sales outlet or our hotline/help desk.
Installing new software
You will find information on installing supplementary programs in the ActiveSync help file that you can
call up after installing ActiveSync on your PC/notebook.
► When installing programs or drivers important files can be overwritten and modified. In order to
gain access to the original files if any problems occur after installation, you should make a
backup before installing (see section "Synchronizing").
The Pharos Traveler GPS 535’s time or date are not correct
► Touch the Clock symbol under Start - Settings - System.
► Change the time.
or
► Connect your Pharos Traveler GPS 535 via ActiveSync to your PC/Notebook.
► Synchronize data between the Pharos Traveler GPS 535 and the PC/notebook. The time and
date are also synchronized in the process.
The display of the Pharos Traveler GPS 535 remains dark
Display lighting is switched off.
► Press the Suspend/Resume button longer than 1 second.
The display is hardly readable
Reflection
► Turn the Pharos Traveler GPS 535 until you can see the information in the display again.
The Pharos Traveler GPS 535 switches off
If you operate the Pharos Traveler GPS 535 too long with only the battery, the Pharos
Traveler GPS 535 switches into the Suspend mode when the battery charge level is too low.
► Connect the Power adapter to charge the battery.
► Press the Suspend/Resume button.