Pharos Science & Applications 535 GPS Receiver User Manual


 
22
First data synchronization between the Pharos Traveler GPS
535 and the PC/notebook
After you have specified the desired and required settings for synchronization in the ActiveSync
Setup Wizard, the first synchronization starts automatically.
Switching Pharos Traveler GPS 535 off and on
Switch the Pharos Traveler GPS 535 on or off with the Suspend/Resume button. After certain
applications or the installation of new programs, it may be necessary to restart the Pharos Traveler
GPS 535 with the soft reset. It is rarely necessary to reset the Pharos Traveler GPS 535 to the
delivered state.
1 = Suspend/Resume button
Switching Pharos Traveler GPS 535 off and on during normal
use
Switching off with Suspend/Resume button
Briefly press the Suspend/Resume button to switch off the Pharos Traveler GPS 535.
The Pharos Traveler GPS 535 is switched to suspend mode.
i
If you have specified a switch-off time with the system settings, your Pharos Traveler GPS
535 will automatically switch into the Suspend mode after this specified time.
There are two ways to switch on your Pharos Traveler GPS 535:
Switching on with Suspend/Resume button
Briefly press the Suspend/Resume button to switch on the Pharos Traveler GPS 535.
Switching on with application buttons
By default, you can also switch your Pharos Traveler GPS 535 on by briefly pressing one of the
application buttons. The application assigned to the respective button appears on the screen.