Filter
Top Products
Ostia User Manual
Page 9
2. Specify if the waypoint location is an Origin or
Destination.
The selected waypoint location will be displayed in
Green if an origin or Red if a destination
Note: The save-option check box is disabled.
New Route
Select this menu item to display a new route
starting at the origin and ending at the destination.
Before this menu item is active, both the origin
and destination must be defined. When the iGPS
receiver is connected and “Enable GPS” is
checked, the iGPS position will be the point of
origin.
1. The Origin is shown as a green line.
2. The Destination is shown as a red line.
3. The Route is shown as a blue path between
origin and destination.
You can define the origin or the destination by
double clicking the place on the map. The map
scale is automatically adjusted so that the origin,
route, and path are all visible.
Reverse Route
Select this menu item to switch the Origin and
Destination of a calculated route.
This will also recalculate the text turn-by-turn
directions in the Directions screen in the View
menu.
Note: The reverse route may be different than the
original route because of divided roads and one-
way streets.