Filter
Top Products
Pinion Too Far into Mesh
Convex Flank
Contact markings closer to heel and root than factory markings
Concave Flank
Contact markings closer to toe and root than factory markings.
Remedy:-
175 series Re-check and decrease shims behind head of pinion.
200 series Re-check and decrease shims behind head of pinion.
210 series Re-check and decrease shims behind head of pinion.
220 series Re-check and decrease shims behind head of pinion.
360 series Re-check and decrease shims behind pinion front bearing cone.
410 series Re-check and increase shims between pinion cartridge and axle case.