Filter
Top Products
General Service Information
Routine Maintenance
Check Interval
For oil leaks around joints and seals Weekly/50 hours
Wheel nut tightness Daily/8 hours
Hub bearing adjustment 12 Monthly/1000 hours
Axle arm/centre case bolts Weekly/50 hours
Halfshaft securing nuts Weekly/50 hours
Propshaft nuts and bolts Weekly/50 hours
Brake pipe connections Weekly/50 hours
Lubricants
The oils used must have the correct additives to be compatible with the mineral oil
braking system, therefore, only those lubricants shown below or their direct equivalents
must be used.
Mobil Fluid 422
Agricastrol AS Special
Esso Torque Fluid 56 or 62
Gulf Universal Tractor Oil
Total Universal Plant Oil
Total Transmission MP
The oil is added via the combined filler/level plug located in the face of the centre housing
on the opposite face from the input flange.
THE OIL CAPACITY IS APPROXIMATELY 6.25 LITRES (11 PINTS)
Greases
The oils seals in the areas listed below should be packed with grease whenever a major
overhaul or a repair to one of these areas is carried out.
1) Hub Seal - between the V Ring Seal and Hub Oil Seal.
2) Pinion Oil Seals
Using the one of the following greases or their equivalents.
Mobil Grease MP
Esso Beacon 2
Total Multis EP2