Parker Hannifin 192-510011N7 Automobile Parts User Manual


 
Accessories for HLE and HLEZ
Automation
31
Parker Hannifin GmbH
Electromechanical Division
Attachment of position sensors and electronic accessories
Attachment variants for position sensors
Tripping plates, switches and distribution box are attached as standard on the same side as the motor.
The limit switches are fitted ensuring that they are activated directly before the start of the standard
safety travel (125 mm). Unless agreed otherwise, the actuator will be supplied with position switches
attached using attachment variant 1 or 2. The tripping plates, switches and distributor sockets are de-
scribed on page 32.
Variant 1: HLE with 3 integrated proximity switches (standard for HLE with load attachment plate)
This sensor attachment is made as standard at the factory. This variant is only possible in the HLEZ, or the HLE carriage
version with bar (T/F/D) and in the corrosion-resistant V2A version (V), if switch lugs are fitted by the customer.
Optional steel strip cover (C) Distribution box
=
=
a
150
b
Schematic drawing
switch
lug
Limit stop Switch lugs Machine origin Limit stop
Standard - HLE HLE with steel strip cover
HLE80 HLE100 HLE150 HLE80 HLE100 HLE150
Dimensions Unit S E S E S E S E S E S E
a
mm 187 262 212 287 249 324 232 307 257 332 294 369
b
mm 171 246 196 271 221 296 216 291 241 316 266 341
Variant 2: HLE or HLEZ with 3 external proximity switches
This sensor attachment is made as standard at the factory for the HLEZ and the HLE versions with bar (T/F/D) and
in the corrosion-resistant V2A version (V).
HLE HLEZ Optional steel strip
cover (only for HLE)
Limit
stop
Drive module
HLEZ
Limit stop HLEZ HLE
125
125
c
d
Standard safety travel Machine origin Standard safety travel Distribution box
Standard - HLE HLE with steel strip cover HLEZ
HLE80 HLE100 HLE150 HLE80 HLE100 HLE150 HLEZ100 HLEZ150
Dimensions Unit S/T E/F S/T E/F S/T E/F S/T E/F S/T E/F S/T E/F S/T E/F S/T E/F
c
mm 223 298 248 323 285 360 268 343 293 368 330 405 248 323 285 360
d
mm 235 310 260 335 297 372 280 355 305 380 342 417 560 635 737 812
The tripping plate is loosely attached in the carriage version with bar (T/F).