Filter
Top Products
HLE – Linear actuators with timing belt drive
Automation
3
Parker Hannifin GmbH
Electromechanical Division
HLE linear actuators with timing belt drive
- for guiding, transporting and positioning -
Contents:
The HLE - a proven technology..............4
Construction of the HLE..........................5
Technical data..........................................6
Dimensional drawings.............................8
HLE 80......................................................8
HLE100...................................................10
HLE 150..................................................12
Idler unit.................................................14
Carriage with bar ..................................14
Order code .............................................15
HLEZ linear actuators with rack-and-
pinion drive.............................................17
Mechanical accessories........................25
Assembly angle plate...........................25
Clamping profile ...................................26
T-nuts and bolts....................................26
Link shaft bearing.................................27
External buffer stop..............................27
Cable carrier..........................................28
Longitudinal flange connection set....30
Attachment of position sensors ..........31
Tripping plate........................................32
Mechanical limit switch........................33
Electrical limit switch...........................33
Distribution box....................................34
Other accessories and software...........34
The dynamic linear unit Typical fields of application Proven technology
for guiding, transporting and posi-
tioning, even over long distances,
offers:
High speeds in practical appli-
cations of up to 7 m/s
Up to 108 Nm permitted driv-
ing torque
Long travel distances, up to
20 m
High load capacity, horizontal
up to 1000 kg /, vertical up to
300 kg
Repeatability, up to ±0.05 mm
High mechanical efficiency of
95 %
Three profile sizes: HLE80,
HLE100 and HLE150, can be
combined in a modular system
Simple, rapid installation and
start-up
as part of advanced, cost-effec-
tive construction of machines and
handling systems:
Materials handling
e.g. pal-
letization, feeding, withdrawal
Textile machinery building
e.g. cross-cutting, slitting and
stacking, quilting, seam stitch-
ing
Process engineering
e.g.
painting, coating, bonding
Warehouse technology
e.g.
picking, storage
Construction
e.g. formwork,
placing reinforcing steel
Clean room technology
e.g.
wafer transport, wafer coating
Machine tool building
e.g.
loading with workpiece, tool
changing
Testing technology
e.g.
guiding ultrasonic sensors
proven in numerous applications,
offers the following advantages:
Low-friction runnin
g
g
uaranteed:
Low particle generation (clean
room suitability to class 10)
low wear
zero maintenance
quiet running
high efficiency and
long service life
High dynamic performance
due to low-mass, play-free
wheels
Simplified inspection with long
inspection intervals.
Longitudinal grooves integra-
ted on all sides of the profile
for mounting attachments or
for use as a cable duct
Timing belts can be replaced
without dismantling load at-
tachment plate.
Flexible installation options
provided by longitudinal groo-
ves in the load attachment
plate.
Subject to technical modification. Data correct at time of printing 06/99