Packard Bell 400 GPS Receiver User Manual


  Open as PDF
of 8
 
5
The Mainboard
Follow the steps below to remove the mainboard:
1. Unlock the flat cable lock upwards (see the square in Fig. 7).
2. Take the flat cable out of the connector.
3. Lift the mainboard from the casing.
The LCD Panel
Follow the steps below to remove the LCD panel:
1. Slightly bend the two clips that hold the LCD panel (see the circles in Fig. 8).
2. Take out the LCD panel.
Fig. 7 The flat cable socket on the mainboard
Fig. 8 LCD panel and front cover.
 previous