Filter
Top Products
2
Opening the Case
To open the case, do as follows:
1. Remove the two screws at the bottom of the Compasseo.
2. Remove the four rubbers from the holes at the back.
3. Then remove the four screws from the same holes.
4. Lift and take away the rear cover.
The Speaker
Remove the speaker by following the steps below:
1. Disconnect the battery cable from the mainboard.
2. Disconnect the speaker cable from the mainboard (see the square in Fig. 3).
Fig. 1 Bottom of the Compasseo.
Fig. 2 The back of the Compasseo