Oregon Scientific WMR80 / WMR80A Radar Detector User Manual


 
2
EN
RAIN GAUGE
ACCESSORIES - SENSORS
This product can work with up to 3 sensors at any one
time to capture outdoor temperature, relative humidity or
UV readings in various locations.
Optional wireless remote sensors such as those
listed below can be purchased separately. For more
information, please contact your local retailer.*
Solar Panel STC800 connectable to Wind Sensor and
Temperature / humidity sensor
Thermo-hygro THGR800 (3-Ch)
Thermo-hygro THGR810 (10-Ch)
UV UVN800
* Features and accessories will not be available in
all countries.
OVERVIEW
FRONT VIEW
1. + / -: Increase / decrease values of the selected
setting; toggle between indoor / outdoor channels
2. LIGHT: Activate backlight
3. MODE: Switch between the different display modes
/ settings; set clock; set altitude; activate autoscan
2 x AA UM-3
1.5V batteries
4 x Screws
(Type B)
1 x Rain Collector
4. UNIT: Select unit of measurement
5. SELECT: Switch between the different areas
6. MIN / MAX: Read the max / min memory readings;
clear readings
BACK VIEW
1. Wall mount hole
2. RESET: Returns unit to default settings
3. SEARCH: Searches for sensors or for the radio-
controlled clock signal
4. EU / UK: Select the nearest radio signal (WMR80
only)
5. Battery compartment
LCD DISPLAY
1. Outdoor remote sensor battery low
2. Weather Forecast Area
3. Temperature Area
4. Wind Speed / Wind Direction / Wind Chill Area
5. UVI / Barometer / Rainfall Area
6. Clock / Alarm / Calendar
/ Moon Phase Area
7. Humidity / Dew Point Area
6 x Washers
1
2
3
4
5
6
1
2
3
4
5
1
2
3
7
4
5
6
WMR80_IM_EN_R1.indd 2 2008.7.1 7:10:46 PM