Omnitech InfoSolutions 15223 GPS Receiver User Manual


 
7
Actions
Tap the Actions button to use an address:
Figure 6 – Actions for Addresses
As Starting Point, which designates the selected address as the route origin (This works only when
you have an invalid GPS signal).
To Show on Map, which displays the selected address on the map.
As saved address – Tap to add an address to your list of favorite locations. For more information
about favorites, see Address Book on page 12.
To see information Tap to display additional address information and phone number (where
available).
Navigate to an Address
Figure 7 – Show on Map
The final step in the address entry is the GO
screen. Here you can validate your address and
you can select from the following route types:
Quickest – This option selects the route that
takes the least amount of time. Quickest is the
default setting.
Shortest – This option selects the route that is
shorter in distance. Note: The shorter route may
not always be the quickest.
Go – When you tap the Go button, the device
calculates the route to your selected destination.
Demo – Tap the icon to start navigating a
simulated route.