Omnitech InfoSolutions 15223 GPS Receiver User Manual


 
4
Location Icons
Current location in Vehicle Mode or Walking Mode.
Last known location when GPS signal is unreliable.
Generated route
Tapping a Location on the Map Screen
You can tap a desired location directly on the Map Screen in both the 2D and 3D map views. This feature is
useful when you want to navigate to a specific point on the map, rather than by the street address. When
you tap on the map, the Popup menu appears with the following options:
Figure 3 – Point on the Map Options
Go There – Navigate to the selected point on the
map.
Add to my Favorites – Save a point on the map to
the Address Book as a favorite destination for future
use.
Set as Starting Point – Designate the selected point
as the starting point instead of your current location.
This works only when you have an invalid GPS signal
(such as indoors).
You can close the Popup menu by tapping the Map
Display button.
Map Views
You can choose to see a two-dimensional or three-dimensional map adjusted specifically for day time or
night time conditions. 2D and 3D can be set by tapping the Compass button on the Map Screen.
From the Settings menu, tap the Day View/Night View toggle button to view the map for day or
nighttime driving and tap the 2D View/3D View toggle button to display the map view in 2-dimensional or
3-dimensional views.
Route Overview
From the Manage Route menu (inside the GO menu) tap the Route Overview button.
An overview of your complete route, the total driving distance to your destination, the
estimated travel time, and the complete destination address, are displayed on the screen.
Cancel Route
From the Manage Route menu tap the Cancel Route button.
The current navigation stops and the GPS clears the route. You can only cancel a route
after a destination has been set.