Filter
Top Products
Assembly
8
Step One: Attach the A-frame tow bar to frame.
IMPORTANT: It is recommended that at least two people perform this step.
1. Raise the front of the sprayer frame until there is enough room for the A-frame tow bar to
fit underneath. Place blocks under the frame to hold it up.
2. Attach the A-frame tow bar to the frame using (6) 5/8 x 1-1/2” bolts, (6) 5/8” flat
washers, and (6) Class G 5/8” nuts. Tighten all bolts to 180 ft-lbs.
5/8 x 1-1/2” bolts
& washers go
through spraye
r
frame firs
t
5/8” flat washe
r
5/8” Class G nu
t
Block
A-frame tow bar
Sprayer
frame