Filter
Top Products
Assembly
11
Piece o
f
cardboar
d
Wheel
Lug bolt
Hub
Shi
m
Step Five: Attach the wheels.
NOTE: For this step, the engine must be free of oil and gas. The broadcast kit and taillight
kit cannot be in place, if equipped.
IMPORTANT: At least two people should perform this step.
1. Place a piece of cardboard on the ground behind the sprayer. The ground should be a
hard, level surface. Lift the tongue of the sprayer until the unit is resting on end in a
vertical position. It may be necessary to place a shim under the tubes so the sprayer
stands in a vertical position.
2. Fasten the wheels to the hubs with
(10) lug bolts. Tighten to 102 ft-lbs.
3. Lower the front of the trailer sprayer
until the wheels and jack touch the
ground.