Filter
Top Products
Get started
13
slide the holder to lock it into place (3). For your safety, install the holder
in the upright position.
Place the navigation device into the mobile holder (4), and press the
device toward the back of the holder until the device clicks into place.
Ensure that the device screen is clearly visible for the user. If you want to
release the navigation device from the mobile holder, pull the device from
the holder.
To use the device for GPS navigation, lift the GPS antenna up to
approximately 90 degrees (5). Do not try to force the antenna open more.
Connect to cigarette lighter socket
You can have the navigation device connected to the cigarette lighter
socket while using the device. See Charge the battery, page 9.
■ Switch on or off
Switch on
To switch on, slide the power switch toward the top of the device, and
press the standby key.
When you switch on the device for the first time, a series of setting
screens are displayed and the GPS navigation application starts. Follow
the displayed instructions to define the settings, and refer to the user
guide of the navigation application to use it.
To exit to the application menu screen and use other applications of the
device, refer to the user guide of the GPS navigation application.
9200268_EN_SP_POB_FR.book Page 13 Friday, March 9, 2007 12:52 PM